Westinghouse SE 6000 Handbuch PDF herunterladen (Seite 10)

Version 5.3 Upgrade Procedure

1-6

SE 6000 Security Management System

14. Press the left-arrow key to select OK and press Enter. The system checks the hard disk which

can takes from 20 minutes to an hour and then installs Release 5.0.2 which can take an hour

or more to load.

15. When Release 5.0.2 is installed, press Enter to continue and the Safe to Power Off message

appears.

16. Remove the SCO OpenServer Boot Disk and the tape.

This concludes phase 2 of the upgrade procedure. Perform the procedure in Phase 3, Installing

Custom Software.

Note

Use the registration form that comes with the SCO upgrade material to register your software.

PHASE 3 INSTALLING CUSTOM SOFTWARE

You will need the 5.3 Update disk and the Edge, Corollary, and Activator drivers software.

In phase 3, you install the Edge, Corollary, and Activator SCO custom drivers software. Note that

if your system has a version 5.1 or older activator, replace it with a version 5.3 activator.

1. Press any key to reboot the system.

2. At the prompt:

SCO OpenServer(TM) Release 5

Boot

Type :defbootstr adapter=ad(0x134,15,5) and press Enter.

3. At the Control-D prompt, enter the root password that was entered in Phase 2, and press

Enter to login as a single user for system maintenance.

4. Insert the 5.3 Update diskette and at the prompt (#), type xinstall; press Enter. The

system displays First Floppy Y/N, type Y; press Enter.

Note

After the upgrade adds each driver, an on-screen prompt asks you to relink the kernel; WSE

recommends that you answer no (n) to each question. The system automatically links the kernel

later in this phase.

When this step concludes, the system asks you to insert the Custom Software. You may

install the Custom Software in any order; WSE recommends that you start with the Edge

drivers software. Before proceeding, remove the 5.3 Update disk.

5. Insert the Edge drivers software and press Enter and the Software Manager (Custom)

screen appears.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Keine Kommentare

Westinghouse SE 6000 Handbuch Seite 10