Westinghouse SE 6000 Handbuch Seite 12

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 30
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 11
Version 5.3 Upgrade Procedure
1-8
SE 6000 Security Management System
1. Press any key to reboot the system.
2. At the prompt
SCO OpenServer(TM) Release 5
Boot
press Enter.
3. At the Control-D prompt, press Ctrl-D; and at the time prompt, enter the correct time or press
Enter to accept the time that is displayed. This brings the system into the multi-user mode
which takes several minutes. If the scologin screen appears with an error (tty02), you can
switch screens by selecting Ctrl-Alt-F1.
4. Login as root and press Enter; type your password and press Enter.
5. Insert the 5.3 Update disk and at the prompt (#), type xinstall; press Enter. The system
displays First Floppy Y/N, type Y; press Enter.
6. When the system prompts you to enter the scratch tape, insert the tape and press Enter. This
could take from 5 to 15 minutes to finish.
7. When the system prompts you to insert the SE 6000 V5.3 tape, remove the scratch tape and
insert the V5.3 tape; press Enter. This could take about 30 to 60 minutes to finish.
After the tape loads, the system reports the number of files that were successfully loaded.
Then it asks if you want to restore the following directories:
/user/stm/hostdata and /user/stm/maps
8. Press Enter to restore the directories. The files are restored and then the system ask you
to select the language of the application.
9 Type the number associated with the language of choice and press Enter. The system builds
the application (database) in the language of choice.
10. Once the system builds the database, press Enter to load it.
11. After the database installs, the following message appears:
Please Remove The Update Diskette And Tape At This Time
12. Remove the Diskette and tape; press Enter.
13. The system shuts down and Safe to Power Off appears. This completes the 5.3 upgrade.
REGISTERING THE BACKUPEDGE SOFTWARE
1. At the root login # prompt, type cd /usr/lib/edge/bin and press Enter.
2. Then type, ./edge.activate and press Enter. The Microlite Corporation On-line
Registration System screen appears.
Seitenansicht 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare